Ausbouw Radio

Is there such a thing? Yes,normally problems... :mrgreen:
So you learnt something about the 8 series and will never forget :top:
Good luck at mount!

more pics about my car at the picture gallery :grinsen1:

Radio is out..

The meganism was broken on the left side..

I did get out the whole part.. boardcomputer.. radio ... klimatronic part everything out.. so i could get the radio off.. but it's out !

I hope i can install the new radio/cd/dvd/mp3/tft tomorrow

dg850: some other question.. do you have a picture of your complete interieur and doors ?

Beautifull black and white lether ! :top:

What a great cable salad. :mrgreen-angel: :top:

Achim

with 2 screwdrivers from the inside of the chute?
I have completed a lot of radios only with the lacing cords...
You have to make a break and drink coffee ,then cool at the work!

last resolution ist the sledge hammer :harhar:

bordcomputer ist aus...

But i cant get the fucking radio out of it :x , i've borrowed some original removal parts from a friend.. special for kennwood.
But the radio doesn't come out.. its as fast as a house..
I think the meganism isn't funcioning anymore.. i need to find an other solution to get the radio out..

Anyone a idee?

Take a look at the pictures and you will find the way ! :grinsen1:
At the back side of the radio you can find only the sensor from the alarm equipment,there´s no screw to affix the radio
You have to fumble something with the radio, it can sit a little fast.
I dont want to push my radio to make some pictures,it´s everytime a problem with the cables at the back side :flop: ,to much to fumble :harhar:
I´ll keep my fingers crossed!!! :top:

ok.. i did only tried above.. lets try again :mrgreen-angel:

some current pics

Attached files

i did put in a ec-card but i can't pus the bc to the front..

thnx for the boarcomputer ! i will try it
But i tried to push something on de left and right from the radio.. but it doesn't work.

Sometimes you can mount the radio on the back ( anti thief ), with a screw.

Thanx !

Hi!
First you shold remove the bordcomputer(bc),take an ec-card and push it at the top-side of the bc between it and the plastic.There a some clamps you have to push and you can remove the bc,its very easy :grinsen1:
Now you can take a look inside,i think there´s no screw :shock:
Kenwood had to remove with an special tool, two metal pull-out hooks,also you could take 2 lacing cords and push it into the left and right side at the radio,so it will unblock the clamps of the mounting frame,in one fell swoop the radio is at your hands

Keep your hair on,you will make it! :top:

Hello,

I need to remove my radio.. because ive bought a Radio/CD/MP3/DVD and 7" TFT

But i can't remove the radio..
Its a kennwood.. 2 thin things on each side.. i put in there something.. but the radio doesn't go free..
I think its mounted als on the back ?? with a screw ?

How can i get there..

If i remove the whole panel.. the radio goes width.. but i cant get it enough to the front.. because the boarcomputer does hit the plastic above..

Please help..